JIGNESH INDUSTRIES are one of the leading manufacturer of Cuplock system from last 25 years in Ahmedabad, Gujarat, India. We are offering range of Cuplock System are Vertical Standard and Horizontal Ledger from Ahmedabad, Gujarat. Cuplock System are used in heavy structure of Construction in building construction and bridge construction and Dam Construction etc. Cuplock […]
Continue Reading
Cuplock Standard / Vertical made up from 48 OD round pipe which is B class medium with IS standard. Various size of cup welded at 500mm Intervals, but 1000mm Interval also available on request. There are two types of cups are used in Cuplock Vertical 1. Top Cup 2. Bottom Cup. Top Cups are made […]
Continue Reading
The U JACK / Adjustable stirrup head is used at the top of the cup lock standard (Vertical) to provide an additional maximum adjustment of length up to 300 – 600 mm. U Head jack is designed to be used in conjunction with adjustable system scaffolding. The main function of U head is hold timber […]
Continue Reading
MS Steel Prop / Telescopic Steel Prop can be used in all type of building construction. It provides the ideal and most economic method of support for all kind of Formwork, Slabs, Beams, Walls and columns. It is used in construction work to withstand vertical loads or acts as wall brace wherever adjustable load bearing […]
Continue Reading
Connects two scaffold tubes at right angles. These are important load bearing components, and the drop forged fittings provide the maximum strength. We provide a heavy duty and a medium duty version for maximum economy which complies with the standard
Continue Reading
Pressed Swivel Couplers connect two scaffold tubes at any angle to provide a ledger brace, façade or similar bracing. Swivel coupler are available in 40X40 mm, 40X50 mm, 50X50mm nominal bore bore (NB) pipes.
Continue Reading
Anchor Nut in Cast Iron is made by high strength steel grade material.Anchor Nut can be in 2 wings, 3 wings and 4 wings, in different types and shape customized.Anchor Nut is used as clamp nut connect normally steel tie rod and tie bars in concrete form work and shuttering work that as connector joint clamp in […]
Continue Reading
Shuttering plates / Centering plates are made using best quality metals and is basically used for supporting items for building construction slab, canopy, Beam, Lintel for R.C.C construction work that can replace the wooden plates. Shuttering plates are fabricated from 3.00/2.5 mm thick MS Sheet and 25/30/35 x 4/5 mm thick MS Angle. As per buyer’s […]
Continue Reading
The function of the swivel coupler is to connect two scaffold tubes at any angle for ledger, facade or similar bracing. These are important structural components and must be load-bearing. We provide alternative models to compliment the double couplers. We facilitate our clients with Swivel Copper Pressed, which is available in various specifications. Size: 48.00 mm
Continue Reading
Sikanja is used for shuttering formwork, Mainly in column. It hold both the sides of wall of column Shikanja is made up of 40 mm M S Flat which tempered by heat treatment to strengthen Apart from this, offered clamps are available in standard as well as customized Available in different sizes, 2’0” , 2’6” […]
Continue Reading