The Soldiers are used for heavy duty concrete wall forming. The length of soldiers are 2.5 m & made up of 50X50X6 mm M S slotted angles & M S sheet of 3 mm to make them strong & tied together to form parallel faces. The panels are joined by wedge sets which are inserted through slots in […]
Continue Reading
Shuttering plates / Centering plates are made using best quality metals and is basically used for supporting items for building construction slab, canopy, Beam, Lintel for R.C.C construction work that can replace the wooden plates. Shuttering plates are fabricated from 3.00/2.5 mm thick MS Sheet and 25/30/35 x 4/5 mm thick MS Angle. As per buyer’s […]
Continue Reading
Pressed Fix Coupler connects two scaffold tubes at right angles. These are critical components in the scaffolds structure & must be load bearing to resist both slip & distortion. The design is based on a strong one piece body with flaps & eye bolts that can be removed for maintenance or replacement. Right angled couplers are available in 40X40 mm nominal bore […]
Continue Reading
Prop nut is part of MS Steel prop. It fits on Prop sleeve and use to adjust the height of Inner up to 150 mm. it has handle through which it can easily move on threaded sleeve. Specification : Weight : 850 Gram Size: 60mm for sleeve of 60mm od.
Continue Reading
Prop sleeves are used in MS Steel Prop. The pipe of 60mm OD is used and the prop sleeve is threaded Rolled Type which gives extra strength to the pipe. To enhance resistance of Prop Sleeve, these are electroplated with high grade material. Specification: Weight : 750 Gram Size 60mm OD, 3.00mm thick threaded 350mm […]
Continue Reading
The locking device is formed by the two cups, a fixed lower cup which is welded to the Vertical at pre-located 0.5 m intervals, and a sliding upper cup. Welded Bottom Cups are pressed from high quality steel and captive mobile Top Cups made out of malleable casting provide firm grip to Ledger Blades making the […]
Continue Reading
The locking device is formed by the two cups, a fixed lower cup which is welded to the Vertical at pre-located 0.5 m intervals, and a sliding upper cup. Welded Bottom Cups are pressed from high quality steel and captive mobile Top Cups made out of malleable casting provide firm grip to Ledger Blades making the […]
Continue Reading
The cuplock Ledger is used to make rigid bond to endure uneven site handling. This cuplock ledger is comprised of Forged Blade at the both end which fits between Top cup and Bottom cup of cuplock vertical.MS round pipe will be used of 48.00 OD 3.00 mm thick. Minimum projection of blades avoids damages in […]
Continue Reading
The spigot pin is used in cup lock system. It is made out of 250/300 long round pipe of 38 MM OD. Spigot is used for ambien 10 mg cup lock standard vertical.Washer is welded at the center of spigot Spigot is connecting internally and to allow ease of generic viagra online. Though small in size. They are […]
Continue Reading
This mobile Top Cups made out of malleable casting provide firm grip to Ledger Blades making the connection rigid and to endure rough site handling. It is free on the cup lock vertical to ensure providing a safe connection at any direction for the horizontal ledger attachment. Specification: Made from Malleable Casting. Top Cup is available […]
Continue Reading